Electric hoist bridge crane is scrapped under the following circumstances

Electric hoist bridge crane is a kind of large machinery, in the process of operation, we must first consider the safety issue, safety is the most important.

Today, we will take a look at the scrapping standard of the electric hoist bridge crane with Henan Mining, so that the equipment can not be used, and our operators do not know, causing the accident. When the crane pulley appears in the following situations, it should be treated as scrapped.

[1] When the wear of the gear groove wall thickness of the equipment is 20% of the original wall thickness, it shall be scrapped;

[2] The phenomenon of cracks;

Electric hoist bridge crane

[3] Due to wear of the equipment, the diameter of the bottom of the wheel groove is reduced by 50% of the diameter of the wire rope;

[4] When the wheel groove of this product receives uneven wear, the wear amount reaches 3mm;

[5] Other defects related to damage to the wire rope;

When the above phenomenon occurs in the equipment, please do not cause an irretrievable accident because of a momentary soft heart.

The safe use of electric hoist bridge crane is your common wish and mine.